NEC Electra Elite IPK II System User Manual page 45

Electra Elite IPK II
When you use Forced Account Code on only toll calls, and you dial a local call, you hear a

beep.
The Timer set in 21-01-14 is applied to toll calls and local calls.

Speed Dial – System/Group/Station bins can contain stored Account Codes. They can be

prevented from being displayed using 20-07-04.
Automatic Route Selection (ARS) can force a user to enter an Authorization Code prior to

using a certain route. The system verifies the ARS Authorization Code dialed against the
ARS Authorization Code list (Program 44-03).
To simplify Account Code Entry, store the Account Code (e.g.,

Key, and press the key instead of dialing the code.
Account Codes appear on the SMDR report (even if they are hidden on the telephone

display).
When using a PBX/CTX trunk and Account Codes, do not use

access code. Otherwise, after the
Account Codes for incoming calls not available for single line telephones.

Default Settings
Account Codes are disabled.
System Availability
Terminals
Any Station
Required Component(s)
VRS for Forced Account Codes for Single Line Telephones
Related Features
Automatic Route Selection
PBX Compatibility
Speed Dial – System/Group/Station
Account Code – Forced/Verified/Unverified
, the trunk stops sending digits to the central office.

Document Revision 4C
1234 ) in a One-Touch
 
as part of the PBX/CTX

2 - 21