Directory Dialing - NEC Electra Elite IPK II System User Manual

Electra Elite IPK II
Enhancements
With Version 1500 or higher telephones that are not connected or uninstalled do not show up in the
Extension Directory.
With Version 1600 or higher, extensions (including Virtual Extensions) can be removed from the
Extension Directory list based on a new Class of Service option (PRG 20-13-51). Prior to this release,
installed extensions and Virtual Extensions with a Name Assigned always displayed in the Extension
Directory list.
Description
Directory Dialing allows a Multiline Terminal user to select a co-worker or outside caller from a list of
names, rather than dialing the telephone number. There are four types of Directory Dialing:
SYS  Company (Common) System Speed Dials

SPDg  Department (Group) Speed Dials

STA  Personal Speed Dials

EXT  Co-worker's Extensions

Conditions
Directory Dialing sorts and searches directory names in alphabetical order (based on all

characters of the name entered) when the system starts up or reboots. The system resorts
extension names when:
You change Program 15-01-01 (Extension Numbers and Names).

Any user dials 700 and changes their extension name.

Directory Dialing follows all the programmed options and conditions for Speed

Dial - System/Group/Station, Intercom Calling and One-Touch Calling.
Extension Directory only shows a telephone/VE that is connected and has a name

assigned in PRG 15-01-01. (Version 1500 or higher is required.)
Default Setting
Enabled

Directory Dialing

Document Revision 4C
Directory Dialing
2 - 365