NEC Electra Elite IPK II System User Manual page 225

Electra Elite IPK II
To place a call using Trunk Group Routing:
1. Go off-hook.
2. Dial 9.
If your system has an Alternate Trunk Route Access code, you may dial that instead.

3. Dial the number.
- OR -
1. At the multiline terminal, press the Trunk Group Routing key (PRG 15-07-01 or SC 752:
2. Dial the number.
To place a call over a specific trunk:
1. Dial 9.
#
2. Dial the line number (e.g., 005 for line 5).
3. Dial the number.
- OR -
1. At the multiline terminal, press line key (PRG 15-07-01 or SC 752: 001 to 200).
2. Dial the number.
To busy out a trunk from outbound usage:
1. Press Speaker + 645 + Trunk Number (001~200) + 1.
The user which busied out the trunk still has access to it. All other users are blocked from seizing it to place an

outgoing call. The trunk, however, can still be answered by any users programmed with the trunk access.
To Remove a Trunk from a Busied Out State:
1. Press Speaker + 645 + Trunk Number (001~200) + 0.
Central Office Calls, Placing
Document Revision 4C
05).

2 - 201