NEC Electra Elite IPK II System User Manual page 704

Hide thumbs Also See for Electra Elite IPK II System:
Table of Contents

Advertisement

Document Revision 4C
Conditions
Temporary 10-Day license can be activated only from a Multiline terminal, not PCPro, or
WebPro.
Each time the temporary license is activated, the program is read only until the temporary
license expires.
Each time the temporary license expires, it can be set again for up to 10 additional days.
After setting a number of days in the program, subsequent days show one less as it counts
down to expiration.
When PRG 90-37-01 shows 1, the license expires at midnight on that day. When the
license expires, the system resets.
If the date is changed in PRG 10-01-XX, while the temporary license is in effect, one day is
subtracted from the license period.
If the date is changed in PRG 10-01-XX, when the temporary license shows 1 day, the
system resets when it is applied (transfer key), not when exiting programming mode.
If any CPU license is activated when the 10 days licensing is being used, the license is
reset with only the activated license(s).
30-Day Promo License
The 30-Day Promo license turns on ACD, CTI, Remote Software Upgrade, Hotel/Motel, 256 MEGACO
stations, and SMDR license for up to 30 days. (Version 1600 or higher required.)
To request for a 30 Day Promo license, go to
generated key and your Tech ID. This can be done only twice per CPUII.
Conditions
This can be used only twice for each IPK II CPUII.
When the Promo License is generated, it gives the date that the license ends (30 days
include the day generated).
If the date is changed in PRG 10-01-XX, while the license is in effect, to a date before the
generated date it subtracts one day from the Promo license.
If the date is changed in PRG 10-01-XX, while the license is in effect, to a date after the
generated date, it runs until the End Date specified when the License was generated.
If the date is changed in PRG 10-01-XX, while the license is in effect, to a date after the
End Date specified when the License was generated, the system resets when it is applied
(transfer key pressed), not when exiting program mode.
When the System time turns to midnight of the End Date, the system resets and comes
back with no licenses.
2 - 680
http://actvate.necii.com/promo
Electra Elite IPK II
and enter in the CPUII
Licensing

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents