NEC Electra Elite IPK II System User Manual page 234

Document Revision 4C
Table 2-8 Class of Service Options (Incoming Call Service), Program 20-09 (Continued)
Item
No.
04
Notification for Incoming Call List Existence
Determine whether or not an extension displays Check
List when an incoming call is missed by a user.
05
Signal/Voice Call
Turn off or on an extension user ability to enable
Handsfree Answerback or Forced Intercom Ringing for
their incoming Intercom calls.
06 Incoming Time Display
If this is set to 1, the Incoming Call Time is displayed on
the multiline terminal LCD while the telephone is ringing.
07 Call Queuing
Turn off or on and extension user ability to have calls
queued if a call rings the extension when it is busy.
08 Calling Party Information
Turn off or on and extension user ability to display calling
party information on CCIS calls.
Table 2-9 Class of Service Options (Answer Service), Program 20-10
Item
No.
01 Group Call Pickup (Within Group)
Turn off or on Group Call Pickup for calls ringing an extension
Pickup Group and ring group calls (Service Code
02 Group Call Pickup (Another Group)
Turn off or on Group Call Pickup for calls ringing outside a
group (Service Code 769).
03 Group Call Pickup for Specific Group
Turn off or on Group Call Pickup for a specific group using
service code 768.
04 Telephone Call Pickup
Turn off or on an extension user ability to pick up a call ringing
into a Pickup Group (Service Codes
2 - 210
Item
Item
# and 756).

Input
Data COS
01~14
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
Input
Data
0 = Off
1 = On
#).

0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
Electra Elite IPK II
Default
Related
Program
COS 15
0 0 20-09-02
1 1 11-11-15
11-11-16
0 0
1 1 20-13-06
1 1 50-02-05
Default
COS
COS 15
01~14
1 1
1 1
1 1
1 1
Class of Service