NEC Electra Elite IPK II System User Manual page 461

Electra Elite IPK II
For example, if trunk port 049 has a trunk name of PRI Ch1, if Program 35-02-03 = 0 (name) and

PRG 35-02-14 = 1 (display date), then SMDR shows 8/19 049. However, if Program 35-02-14 = 0
(date not displayed), the SMDR shows PRI Ch1.
For proper handling of DNIS calls, the name field (Program 22-11-03) must be the same as the

received DNIS digits (Program 22-11-01). If this is not set, CallAnalyst cannot track transferred
calls since the system displays the DNIS number when a call is received and displays the DNIS
name for transferred calls. This setting has no impact on outgoing calls, which display the trunk
name instead of the DNIS name.
Caller ID name can be displayed in SMDR records. Program 35-02-17 must be set to 0 and

Program 35-02-18 set to 1.

14-01-06 Basic Trunk Data Setup – SMDR Printout
Have the system include (1) or exclude (0) the trunk being programmed for the SMDR printout.

15-01-03 Basic Extension Data Setup – SMDR Printout
For each extension, enter 1 if an extension call should appear on the SMDR report. Enter 0 for
the extension if the calls should not appear.

35-01-01 SMDR Options – Output Port Type
Specify the type of connection used for SMDR
0 = No Setting (default)
1 = CPUII ( )-( ) COM Port 1
3 = LAN,
4 = CTA
The baud rate for the serial COM port should be set in PRG 10-21-02 or PRG 15-02-19.

35-01-02 SMDR Options – Output Destination Number
Specify (up to 8 digits) the SMDR printer output extension (CTA/CTU extension number).
Default is No Setting

35-01-03 SMDR Options – Header Language
Specify the language in which the SMDR header should be printed.
0 = English (default)
1 = German
2 = French
3 = Italian
4 = Spanish.
Set this entry to 0 for Elite CallAnalyst.

35-01-04 SMDR Options – Omit Digits
The number of digits entered for this option do not print on the SMDR Report (0~24). For
example, if the entry is 10, the first 10 digits a user dials do not appear on the SMDR report.

35-01-05 SMDR Options – Minimum Digits
Outgoing calls must be at least this number of digits (0~24) for inclusion in the SMDR report.
Default is 0.
Elite CallAnalyst
Document Revision 4C
2 - 437