NEC Electra Elite IPK II System User Manual page 794

Document Revision 4C
DID and DIL trunks do not ring external page speakers. Only trunks defined as normal in

Program 22-02-01 ring external page speakers.
Paging keys can be assigned on Programmable Function Keys and Direct Station Selection

(DSS) Consoles to simplify External Paging operation.
If a PGD(2)-U10 ADP circuit has a Door Box connected, you cannot use that circuit for

External Paging.
To have outside calls ring External Paging Zones at night, refer to the Night Service feature

and Program 31-05.
The PGD(2)-U10 ADP can be connected only to an ESIB(8)-U20 ETU. if the PGD(2)-U10

ADP is connected to an ESIE(8)-U20 ETU, the PGD(2)-U10 ADP is NOT recognized.
When a ESIB(8)-U20 ETU has an ESIE(8)-U20 ETU installed [ESIB/E(16)], the

PGD(2)-U10 ADP has both channels available for Paging, MOH, External Ringers and
Door Box according to strapping on ports 1~8. The corresponding port on the ESIE(8)-U20
ETU do not support a station or other hardware (it is used by the PGD(2)-U10 ADP for
channel 2).
When a ESIB(8)-U20 ETU is installed without an ESIE(8)-U20 ETU installed, a

PGD(2)-U10 ADP installed on ports 1~8 is recognized, but only channel 1 on the
PGD(2)-U10 ADP is supported. Channel 2 is not available.
ESIB(8)-U10 ETUs and ESIE(8)-U10 ETUs do not support the PGD(2)-U10 ADP.

The maximum number of PGD(2)-U10 ADPs is 56. Refer to the Hardware Manual for more

information which describes how many of the 56 can be for paging, door box or Music on
Hold (MOH).
Phones that have an APR/APA installed do not pass voice to a trunk used for paging until

the interdigit time expires (Program 21-01-03).
Default Setting
No External Paging defined.
System Availability
Terminals
All Stations
2 - 770
Electra Elite IPK II
Paging, External