NEC Electra Elite IPK II System User Manual page 65

Electra Elite IPK II

90-11-08 System Alarm Report – To Email Address
When Alarm Reports are to be e-mailed, set this e-mail address to which the report should be
sent.
Up to 255 characters
Default = No Setting

90-11-09 System Alarm Report – Reply Address
When Alarm Reports are to be e-mailed, set the e-mail address where replies should be
e-mailed.
Up to 255 characters
Default = No Setting

90-11-10 System Alarm Report – From Address
When Alarm Reports are to be e-mailed, set this e-mail address for the station sending the
report.
Up to 255 characters
Default = No Setting

90-11-11 System Alarm Report – DNS Primary Address
When Alarm Reports are to be e-mailed, set the DNS primary address.
0.0.0.0 ~ 255.255.255.255
Default = 0.0.0.0

90-11-12 System Alarm Report – DNS Secondary Address
When Alarm Reports are to be e-mailed, set the DNS secondary address.
0.0.0.0 ~ 255.255.255.255
Default = 0.0.0.0

90-11-13 System Alarm Report – Customer Name
When Alarm Reports are to be e-mailed, enter a name to identify the particular system.
Up to 255 characters
Default = No Setting

90-25-01 System Alarm Report CC Mail Setup – CC Mail Address
Up to 255 characters
Default = No Setting
Operation
To use this feature at any terminal:
The user must be logged in with an Installer (IN) level password defined in Program 90-02.
Alarm Reports
Document Revision 4C
2 - 41