NEC Electra Elite IPK II System User Manual page 41

Electra Elite IPK II
To enter an Account Code for an incoming call:
This procedure is not available for single line telephones.
1. Answer incoming call.
If Account Codes for Incoming Calls is disabled, the following steps dial digits out onto the connected trunk.

2. Dial .

3. Enter the Account Code.
You can enter any code of the proper length. Incoming Account Codes cannot be Forced or Verified.

4. Dial .

To enter an Account Code while placing a trunk call:
If your system has Forced Account Codes, you must follow this procedure.
1. Access trunk for outside call.
Press a line key or dial a code to access a trunk. Refer to

information.
2. Dial .

3. Dial your Account Code (1~16 digits, using 0~9 and
4. Dial .

5. Dial number you want to call.
If you hear "stutter" dial tone after dialing the number, ARS is requesting you to enter an ARS Authorization

Code. Refer to the
Codes.
To enter an Account Code at a single line telephone:
1. Access trunk for outside call.
You can access a trunk by dialing a code. Refer to Central Office Calls, Placing for more information.

2. Dial .

3. Enter Account Code (1~16 digits).
4. Dial .

5. Dial number you want to call.
If you hear "stutter" dial tone after dialing the number, ARS is requesting you to enter an ARS Authorization

Code. Refer to the
Codes.
Account Code Entry
Automatic Route Selection on page 2-83
Automatic Route Selection on page 2-83
Central Office Calls, Placing on page 2-195
).
#
feature for more information on ARS Authorization
feature for more information on ARS Authorization
Document Revision 4C
for more
2 - 17