Pulse To Tone Conversion - NEC Electra Elite IPK II System User Manual

Electra Elite IPK II
Description
An extension can use Pulse to Tone Conversion on trunk calls. Pulse to Tone Conversion lets a user
change their extension dialing mode while placing a call. For systems in a Dial Pulse area, this permits
users to access dial-up OCCs (Other Common Carriers – such as MCI) from their DP area. The user
can, for example:
Place a call to an OCC over a DP trunk.

Depending on programming:

Manually implement Pulse to Tone Conversion
- OR -
Wait 10 seconds.
Dial the OCC security code and desired number. The system dials the digits after the conversion

as DTMF.
Conditions
Pulse to Tone Conversion is valid only for Dial Pulse trunks (Program 14-02-01, options 0 or 1).
Default Setting
Enabled
System Availability
Terminals
All Multiline Terminals

Pulse to Tone Conversion

Pulse to Tone Conversion
Document Revision 4C
2 - 823