Document Revision 4C
To answer an Incoming Ringing Call:
1.
When the handset is in the charger, lift it. icon is displayed.
2.
When the handset is out of the Base Unit, press TALK if ringing line preference is assigned.
icon is displayed.
3.
Talk.
To place a call on Hold (internal or outside):
With a call in process, press HOLD.
To retrieve a held call, press flashing F1~F4.
After a programmed time, the held call recalls to the originating terminal.
To redial a number:
1.
Press REDIAL.
2.
The previously dialed number is called.
To transfer a call:
1.
With a call in process, press TRANSFER.
2.
Dial Station Number.
- OR -
Press (F1~F4) programmed for Direct Station Selection (DSS).
3.
Announce call (optional).
4.
Press TALK to complete transfer.
To place a conference call:
1.
With a call in progress, press CONF.
2.
Place second internal or external call.
3.
Announce conference.
4.
Press CONF again. A 3-party conference is established. When any party hangs up, the
conference still includes the remaining parties.
2 - 392
Electra Elite IPK II
term
D
Cordless II Terminal