NEC Electra Elite IPK II System User Manual page 772

Document Revision 4C

11-12-43 Service Code Setup (for Service Access) – Answer No-Ring Line (Universal Answer)
Customize the service code (#0) used to manually answer a Universal Night Answer.

11-12-50 Service Code Setup (for Service Access) – General Purpose Relay
Define the service code used for turning the general purpose relay on and off (default = 780).

12-01-01 Night Mode Function Setup – Manual Night Mode Switching
Allow (1)/Prevent (0) any extensions from activating Manual Night Service.

12-01-02 Night Mode Function Setup – Automatic Night Mode Switching
Enable (1)/Disable (0) Automatic Night Service for the system. Make sure to set the Service
Patterns in PRG 12-02-01, PRG 12-02-02 and PRG 12-02-03.

12-02-01 Automatic Night Service – Start Time
For each Night Service Group, enter up to 20 start times for each Time Pattern (1~10).
The pattern first start time (Pattern 1) should begin at 00:00 (midnight).

12-02-02 Automatic Night Service – End Time
For each Night Service Group (01~32), enter up to 20 end times (0000~2359) for each Time
Pattern (1~10).

12-02-03 Automatic Night Service – Operation Mode
For each Night Service Group (01~32), define the Night Service Mode (1~8) for up to 20 start/
end times for each Time Pattern (1~10).

12-03-01 Weekly Night Service Switching
Assign one of the 10 Time Patterns programmed in PRG 12-02-01 to each day of the week.

12-04-01 Holiday Night Service Switching
Assign one of the 10 Time Patterns to holidays.
(default: No Setting)

12-05-01 Night Mode Group Assignment for Extensions
Assign a Day/Night Mode Group (01~32), for each extension.
(default: 1)

12-06-01 Night Mode Group Assignment for Trunks
Assign a Day/Night Mode Group (01~32), for each trunk port (1~200).
(default: 1)

12-07-01 Text Data for Night Mode
Create an original text message (up to 12 characters) which is displayed on an LCD of multiline
terminal in each Night Mode.

12-08-01 Night Mode Service Range
For each Night Mode Group (01~32), determine how many night modes (0~9) a user toggles
through when the Night Mode key is pressed.
(default: 2)

14-07-01 Trunk Access Map Setup
To allow for Universal Night Answer (UNA) answering, set up the Trunk Access Maps (1~200).
For UNA, extension must have incoming access to trunk ringing the External Paging speakers.
2 - 748
Electra Elite IPK II
Night Service