NEC Electra Elite IPK II System User Manual page 375

Electra Elite IPK II
Operation
To place a DISA call into the system (from any 2500 type telephone):
1. Dial the telephone number that rings the DISA trunk.
2. Wait for the DISA trunk to automatically answer with a unique dial tone.
3. Dial the 6-digit DISA password (access code).
4. Wait for a second unique dial tone.
5. Dial an extension.
- OR -
Dial 9 for Trunk Group Routing or ARS.
- OR -
Dial Alternate Trunk Route Access Code (if enabled).
- OR -
Dial 704 + a trunk group number (1~100) for an outside call.
- OR -
Dial 9 + a trunk number (1~200) for an outside call.
#
- OR -
Dial 2 + System Speed Dialing bin number.
#
- OR -
Dial 0 for the operator.
- OR -
Dial 701 + an Internal Paging Zone number (0, 1~9, 00, 01~64).
- OR -
Dial 703 + an External Paging Zone number (1~8 or 0 for All Call).
- OR -
Dial 710 + a busy extension number to barge in to a call.
To forward an extension calls using a DISA call into the system (from any 2500 type telephone):
1. Dial the telephone number that rings the DISA trunk.
2. Wait for the DISA trunk to automatically answer with a unique dial tone.
3. Dial the 6-digit DISA password (access code).
4. Wait for a second unique dial tone.
5. Dial the Call Forward service code (as defined in PRG 11-11-01 through PRG 11-11-05).
Direct Inward System Access (DISA)
Document Revision 4C
2 - 351