NEC Electra Elite IPK II System User Manual page 355

Electra Elite IPK II

22-11-09 DID Translation Number Conversion – Music On Hold Source
For each DID Translation Table entry (1~2000), specify the source of music to be used for DID
trunks.
0 = IC/MOH Port (default)
1 = BGM Port
2 = ACI Port

22-11-10 DID Translation Number Conversion – ACI Music Source Port
For each DID Translation Table entry (1~2000), if item 2 is selected in PRG 22-11-09, specify
the port to be used for the source of music heard on DID trunks. (default: 0).

22-11-11 DID Translation Number Conversion – Ring Group Transfer
Enable (1)/Disable (0) each conversion table to follow the Ring Group programming defined in
Program 22-12-01 : DID Intercept Ring Group. If Program 22-11-05 : DID Translation Number
Conversion, Transfer Destination Number 1 and Program 22-11-06 : DID Translation Number
Conversion, Transfer Destination Number 2 are set, the priority of transferring is in this order:
Program 22-11-05 then Program 22-11-06 then if Program 22-11-11 is enabled, Program
22-12-01.

22-12-01 DID Intercept Ring Group
For each DID Translation Table, program the DID Intercept destination. The destination can be a
Ring Group, In-Skin/External Voice Mail, or Centralized Voice Mail. This program is used when
no destination is programmed in Program 22-11-05. It is unrelated to Program 22-11-06 and
PRG 22-11-07.
Ring Groups:
1~100 (default: 1)
102 = In-Skin/External Voice Mail

22-13-01 DID Trunk Group to Translation Table Assignment
Assign the DID trunk groups to translation tables. If all the DID trunks use the same type of DID
service, you may have only one DID trunk group and one DID Translation Table (with many
entries).
Trunk Groups: 1~100

25-01-01 VRS/DISA Line Basic Data Setup – VRS/DISA Dial-In Mode
Determine whether the system should use Extension number/Service code specify (0)) or Dial
conversion table (1) for calls.

25-01-03 VRS/DISA Line Basic Data Setup – VRS/DISA Transfer Alarm
Determine whether the system should use Normal (0) or Alarm (1) for calls.
Direct Inward Dialing (DID)
Document Revision 4C
2 - 331