NEC Electra Elite IPK II System User Manual page 407

Hide thumbs Also See for Electra Elite IPK II System:
Table of Contents

Advertisement

Electra Elite IPK II
Single Line Telephone
If you are busy on a call, an off-hook signal is heard indicating the incoming Door Box call.
1.
Press the Flash key or hookflash to place your active call on hold.
2.
Dial the door box access code (702 by default) plus the door box number (1~8) to answer the Door
Box call.
To retrieve the original call, hang up. The original call rings the single line telephone.
To activate Call Forwarding Off-Premise for a Door Box:
This option only works for ISDN PRI or BRI Trunks.
1.
At the multiline terminal, press Speaker + dial SC 722.
- OR -
At the multiline terminal only, press the External Forward by Doorphone key (PRG 15-07-01 or SC
751, code 54).
- OR -
At the single line telephone, lift the handset + dial 722.
2.
Dial the Door Box number (1~4).
3.
Dial the Speed Dialing number where the calls should be forwarded.
4.
Press Speaker (or hang up at the single line telephone) to hang up.
To cancel Call Forwarding Off-Premise for a Door Box:
1.
At the multiline terminal, press Speaker + dial SC 722.
- OR -
At the multiline terminal only, press External Forward by Doorphone key (PRG 15-07-01 or SC
751, code 54).
- OR -
At the single line telephone, lift the handset + dial 722.
2.
Dial 0 for Cancel.
Door Box
Document Revision 4C
2 - 383

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents