NEC Electra Elite IPK II System User Manual page 40

Document Revision 4C
1. Dial .

- OR -
Press your Account Code key (PRG 15-07 or SC 751: code 50).
2. Dial your Account Code (1~16 digits, using 0~9 and
If Account Codes are hidden, each digit you dial shows an

3. Dial .

- OR -
Press your Account Code key (PRG 15-07 or SC 751: code 50).
To enter an Account Code before dialing the outside number:
If your system has Forced Account Codes, you must use this procedure. If it has Verified Account
Codes, you can use this procedure instead of letting the system prompt you for your Account Code. You
may also use this procedure if your system has Optional Account Codes.
If your system has Verified Account Codes enabled, be sure to choose a code programmed into your
Verified Account Code list.
1. Access trunk for outside call.
Press a line key or dial a code (except 9) to access a trunk. Refer to

for more information.
2. Dial .

- OR -
Press your Account Code key (PRG 15-07 or SC 751: code 50).
3. Dial your Account Code (1~16 digits, using 0~9 and
If you make an incorrect entry, your system may automatically alert the operator. If Account Codes are hidden,

each digit you dial shows an
4. Dial .

- OR -
Press your Account Code key (PRG 15-07 or SC 751: code 50).
5. Dial the number you want to call.
If you hear "stutter dial tone after dialing the number, ARS is requesting you to enter an Automatic Route

Selection Authorization Code. Refer to
2 - 16
on the telephone display.

Automatic Route Selection on page 2-83
).
#
on the telephone display.

Central Office Calls, Placing on page 2-195
).
#
for more information.
Electra Elite IPK II
Account Code Entry