NEC Electra Elite IPK II System User Manual page 598

Document Revision 4C
Conditions
None
Default Setting
None
System Availability
Terminals
All Multiline Terminals
Required Component(s)
IAD(8)-U10 ETU – SIP package
Related Features
None
Programming

10-03-01 ETU Setup

11-01-01 System Numbering

14-02-01 Analog Trunk Data setup – Signaling Type (DP/DTMF)
At default, PRG 14-02-01 is set to 2 (DTMF). For the IAD trunks this must be set for Dial Pulse
[either 0 (10PPS) or 1 (20PPS)].

14-05-01 Trunk Group – Trunk Group Number

44-02-01
through
44-02-03 Dial Analysis Table for ARS/F-Route Access
2 - 574 IP Trunk – (SIP) Session Initiation Protocol
Electra Elite IPK II