Ancillary Device Connection - NEC Electra Elite IPK II System User Manual

Electra Elite IPK II
Enhancements
Version 1500 uses the corresponding port on the ESIE(8)-U20 ETU as the port number used when using the
APR on the second B-channel and not ports 193~256.
Description
Ancillary Device Connection allows installation of selected peripheral (ancillary) devices to a multiline
terminal. This feature enhances peripheral device objectives.
An Electra Elite IPK II multiline terminal user can accomplish this by using the AP(R)-R Unit (Analog Port
Adapter with Ringer) or AP(A)-R Unit (Analog Port Adapter without Ringer) for analog telephone
devices, or installing the AD(A)-R Unit to connect devices such as tape recorders.
The AP(A)-R/AP(R)-R Unit is the interface for installing a single line telephone, Modem, credit card
reader, wireless headset, NEC Conference Max Conferencing unit or other compatible analog device.
term
The Elite IPK II D
Gigabit connection.
System Availability
Terminals
All multiline terminals except DTR-2DT-1 TEL, DTP-2DT-1 TEL, and DTP-16HC-1 TEL.
The Elite IPK II D
Required Component(s)
APR-U, AP(R)-R, APA-U, AP(A)-R, or Dterm Gig Adaptor.
Conditions
The optional device fits underneath the terminal.


Ancillary Device Connection

IP Gig Adaptor allows all compatible NEC IP multiline terminals to support a
term
IP Gig Adaptor supports all compatible NEC IP multiline terminals.
Ancillary Device Connection
Document Revision 4C
2 - 53