NEC Electra Elite IPK II System User Manual page 796

Document Revision 4C

20-13-29 Class of Service Options (Supplementary Service) – Paging Display
Turn Off (0) or On (1) an extension user ability to display incoming internal paging information.
(default: 1)

31-01-02 System Options for Internal/External Paging – Page Announcement Duration
Set the maximum allowable time (0~64800 seconds) for a Paging announcement. (default:
1200)

31-04-01 External Paging Zone Group
Assign each External Paging Speaker to an External Paging Group (0~8) used for accessing the
zone. If zones 1~8 are not connected to PGD(2)-U10 ADP, set these unused zones to External
Paging Group 0.
External Paging Speaker/Zones: 1~9

31-05-01 Universal Night Answer/Ring Over Page
Assign Universal Night Answer ringing (1)/ No ringing (0) to each External Paging zone. For
each trunk port, make a separate entry for each External Paging Zone (1~9). (default: 1200)

31-06-01 External Speaker Control – Broadcast Splash Tone before Paging (Paging Start Tone)
Enable Splash Tone (1) or Chime Tone (2)/Disable both (0) for each External Speaker Number
(1~9). (default: 2)

31-06-02 External Speaker Control – Broadcast Splash Tone after Paging (Paging End Time)
Enable Splash Tone (1) or Chime Tone (2)/Disable both (0) for each External Speaker Number
(1~9). (default: 2)

31-06-04 External Speaker Control – CODEC Transmit Gain Setup

31-06-05 External Speaker Control – CODEC Receive Gain Setup
Select the CODEC gain types (1~32) for each External Speaker (1~9).
(default: 32)

31-07-01 Combined Paging Assignments
Assign an External Paging Group (0~8) to an Internal Paging Zone (0 = All Call, Zones 1~64) for
Combined Paging. When an extension user makes a Combined Page, they simultaneously
broadcast into both the External and Internal Zone. (default: 1).

31-08-01 BGM on External Paging – BGM
Enable (1)/Disable (0) the Background Music option for each External Paging Zone (1~9). If set
to 1, the system plays Background Music over the zone when it is idle. (default: 0)
Operation
To Page into an external zone:
1. Press External Paging key (PRG 15-07 or SC 751: 19 for External Paging zones or 20 for External
All Call Paging).
2. Make announcement.
2 - 772
Electra Elite IPK II
Paging, External