NEC Electra Elite IPK II System User Manual page 804

Document Revision 4C
When the terminal that has a call in Personal Park is unplugged, the Personal Park is

released and the held caller is placed on Non-Exclusive Hold.
The following table indicates what condition the service codes and Programmable Function

key can be used.
Speaking
ICM Dial Tone or Busy Tone
Calling Another Extension
Receiving a Personal Park Recall
A user can display the Caller ID of a call in Park if Caller ID is enabled (1) in Program

20-09-02.
Park keys can be assigned on DSS consoles.

Calls on virtual extension keys cannot be put in Personal Park if program 15-18-01 is set to

Land on the key (1).
Function keys simplify Park operation.

Calls on Virtual Extension keys cannot be Call Parked.

One Touch keys programmed for Park Hold Service Code cannot be used to park calls

without first using Hold or Transfer.
Call Park – Step Call is supported in the local system only.

Program 20-11-27: Class of Service Options (Hold/Transfer Service) – Call Park

Automatically Searched is not supported in Version 1600.
Default Setting
Enabled
2 - 780
Status
Not Available
Available
Not Available
Not Available
Using 3-Digit Using 1-Digit
Service Code Service Code
Not Available
Not Available
Available
(with outside call
on hold – when
called extension
does not answer)
Not Available
Electra Elite IPK II
Using
Personal
Park Key
Available
Available
Available
Available
Park