NEC Electra Elite IPK II System User Manual page 405

Electra Elite IPK II

10-05-01 General Purpose Relay Setup
Define which Relay circuits (5~8) on a PGD(2)-U10 ADP Adapter are used for General Purpose
Relay.

11-12-36 Service Code Access (for Service Access) – Door Box Access
If the service code for Doorphone Access (702 by default) is not acceptable, change it here.

15-07-01 Programmable Function Keys
Assign a function key for External Call Forward by Doorphone (Code 54).

32-01-01 Door Box Timers – Door Box Answer Time
Set the time (0~64800 seconds) a user has to answer the Door Box chimes. Default is 30.

32-01-02 Door Box Timers – Door Lock Cancel Time
Set the time (0~64800 seconds) the Door Box strike stays open when the single line telephone
user hookflashes or a multiline terminal user presses the Recall key. Default is 10.

32-02-01 Door Box Ring Assignments
Determine which Door Boxes should ring which extensions by entering the extension number.
Each Door Box can be programmed to ring up to 32 extensions and an extension can be
programmed to ring for multiple Door Boxes.
Door Boxes: 1~8

32-03-01 Door Box Basic Setup – Chime Pattern
Set the chime pattern (0~6) for each Door Box.

32-03-02 Door Box Basic Setup – CODEC Transmit Gain Setup

32-03-03 Door Box Basic Setup – CODEC Receive Gain Setup
Select the CODEC gain type (1~63) for each Door Box.
Door Boxes: 1~8
Gain Type:
Related Features
Call Forwarding, Off-Premise
Paging, External
Single Line Telephones, Analog 500/2500 Sets
Wireless – DECT
Door Box
1~63 (default: 32
Document Revision 4C
2 - 381