NEC Electra Elite IPK II System User Manual page 179

Electra Elite IPK II
Intercom
Park
Privacy (Data)
Programmable Function Keys
Voice Mail
Programming

11-12-08 Service Code Setup (for Service Access) – Barge-In
Determine what the service code should be for an internal party to use Barge-In (default = 710).

11-16-02 Single Digit Service Code Setup – Barge-In
Set up Item 02 for single digit Barge-In. For example, you can assign Item 02 to use digit 5 for
Barge-In. This allows you to program a function key with an extension number plus the Barge-In
code (i.e., 305 5). This allows one-touch access to Barge-In for extension 305. If you undefine a
service code, be careful when you change this item that you don't inadvertently disable any
essential dialing function (such as Voice Mail or Message Waiting).

15-07-01 Programmable Function Keys
Assign a function key for Barge-In (code 34).

20-06-01 Class of Service for Extensions
Assign a Class of Service (1~15) to an extension.

20-13-10 Class of Service Options (Supplementary Service) – Barge-In Monitor
Enable the Barge-In Speech Mode (0) or Monitor Mode (1) at the initiating extension (i.e., Barge-
In initiator).

20-13-15 Class of Service Options (Supplementary Service) – Barge-In, Initiate
Enable (1)/Disable (0) Barge-In at the initiating extension (i.e., Barge-In initiator).

20-13-16 Class of Service Options (Supplementary Service) – Barge-In, Receive
Enable (1)/Disable (0) Barge-In at the receiving extension (i.e., Barge-In receive).

20-13-17 Class of Service Options (Supplementary Service) – Barge-In Tone/Display (Intrusion
Tone)
Enable (1)/Disable (0) the Barge-In Tone. If disabled, this also turns off the Barge-In display at
the called extension.

20-13-32 Class of Service Options (Supplementary Service) – Deny Multiple Barge-Ins
Enable (1)/Disable (0) the extension user ability to have multiple users Barge-In to their
conversation.
Call Monitoring
Document Revision 4C
2 - 155