NEC Electra Elite IPK II System User Manual page 75

Electra Elite IPK II
After you call an ACI software port:
If the port is set for input (Program 33-01-01=1) and a music source is connected, you hear music.

- OR -
If the port is set for output (Program 33-01-01=2) and External Paging is connected, you can page

into the external zone.
- OR -
If the port is set for output (Program 33-01-01=2) and a loud ringer is connected, you activate the

loud ringer.
To manually record a call an ACI software port:
1. While on a call, press the ACI Conversation Record key (PRG 15-07 or SC 751: 69 + 0).
The key LED is on when recording.

2. To stop recording, press the ACI Conversation Record key once again.
The key LED is off when recording has stopped.

Analog Communications Interface (ACI)
Document Revision 4C
2 - 51