NEC Electra Elite IPK II System User Manual page 459

Electra Elite IPK II
The SMDR call buffer stores 500 calls. The buffer stores calls when the SMDR device is

unavailable. When the buffer fills, the oldest record is deleted to allow the new record to be
saved.
The IPK II SMDR does not provide data to support the tracking of tandem calls or

conference calls. Tandem calls appear as one call in with extension number shown as the
trunk it was answered on, and out with the extension number as the trunk used to make the
call. Conference calls show only the last party to join the conference and the party that
answered the call.
Default Setting
None
System Availability
Terminals
All Terminals:
Incoming CO/PBX Call

Outgoing CO/PBX Call

Conference CO/PBX Call

Transferred CO/PBX Call

Required Component(s)
LAN connection for SMDR over Ethernet
Minimum PC Requirements:
PC with Pentium Processor

64 MB RAM

VGA monitor 800 X 600 resolution (SVGA 1024 X 768 recommended)

Windows 98 (SE), Windows 2000/XP Professional, Windows 2000/2003 server

80 MB free hard drive space

CD-ROM drive (When using CD for installation)

Available serial port and RS-232 cable

Elite CallAnalyst
Document Revision 4C
2 - 435