NEC Electra Elite IPK II System User Manual page 927

Electra Elite IPK II

15-07-01 Programmable Function Keys
Assign a function key for System Speed Dialing (27) or Group Speed Dialing (28). You can
program the key as either a general Speed Dialing key or you can choose to store a bin number
with the function key. This key would then always dial the associated bin number. If storing a bin
number along with the code, do not store 0, 00 or 000. To bypass entering a bin number, press
Hold (Hold is also required if programming the function key using the service code 751).

15-14-01 Programmable One-Touch Keys – Station Speed Dial Data
Assign the extension (up to 24 digits) Speed Dial number (1~10).
(default: No Setting)

15-14-02 Programmable One-Touch Keys – Station Speed Dial Name
Assign the name (up to 12 digits) associated with the extension Speed Dial Bin (1~10).
(default: No Setting)

20-06-01 Class of Service for Extensions
Assign a Class of Service (1~15) to an extension.

20-07-04 Class of Service Options (Administrator Level) – Storing Speed Dialing Entries
Allow (1)/Prevent (0) the storing of Speed Dialing entries (codes 753 and 754). Preventing this
option also prevents the user's display from showing the telephone number. This can be used
when you want to prevent account codes from being displayed.
(default: 1)

20-08-03 COS Options (Outgoing Call Service) – System Speed Dialing
Enable (1)/Disable (0) System Speed Dialing.
(default: 1)

20-08-04 COS Options (Outgoing Call Service) – Group Speed Dialing
Enable (1)/Disable (0) Group Speed Dialing.
(default: 1)

30-03-01 DSS Console Key Assignment
For DSS Console Chaining, assign an Speed Dialing Service Code (or ) plus a 2-digit bin
number to a DSS Console key.

80-03-01
through
80-03-08 DTMF Tone Receiver Setup

80-04-01
through
80-04-09 Call Progress Tone Detector Setup
If required, modify the criteria for dial tone detection and call progress tone detection for
outgoing Speed Dialing calls.
Speed Dial – System/Group/Station
Document Revision 4C
2 - 903