NEC Electra Elite IPK II System User Manual page 473

Electra Elite IPK II
Any feature which requires dialing a code or extension number can be affected.

When the system searches the Dial Extension Analyze Table (PRG 11-20-01), it uses

prefix searching, giving the lower table number the higher priority. For example, if the user
programs 211 in table 1 and 2113 in table 2, then dials 2113, the system selects table 1.
Example for 310X
10s Group
11-01-01 = Dial 3
31 Digit 4 = (9)Dial Extension Analyze Table
11-20-01 Table 1 = Dial 310
11-20-02 Table 1 = Intercom
Example for 31000X
1000s Group
11-01-01 = Dial 3
31 Digit 4 = (9)Dial Extension Analyze Table
11-20-01 Table 1 = Dial 31000
11-20-02 Table 1 = Intercom
Program 11-01-01 9: System Numbering – Dial Extension Analyze is not supported in

Version 1600.
Program 11-20-01: Dial Extension Analyze Table – Dial and Program 11-20-02: Dial

Extension Analyze Table – Type of Dials are not supported in Version 1600.
Default Setting
Extensions and Virtuals are numbered in the following order:
Program 11-02-01 and Program 11-04-01
Physical Extensions:

Extn Port 1 = 101 ~ Extn Port 99 = 199

Extn Port 100 = 3101 ~ Extn Port 256 = 3257

Flexible System Numbering
(4-digit)
(6-digit)
Example for 3100X
100s Group
(5-digit)
11-01-01 = Dial 3
31 Digit 7 = (9)Dial Extension Analyze Table
11-20-01 Table 1 = Dial 3100
11-20-02 Table 1 = Intercom
Example for 310000X
10,000s Group
(7-digit)
11-01-01 = Dial 3
31 Digit 7 = (9)Dial Extension Analyze Table
11-20-01 Table 1 = Dial 310000
11-20-02 Table 1 = Intercom
Document Revision 4C
2 - 449