NEC Electra Elite IPK II System User Manual page 279

Electra Elite IPK II
- OR -
Access outside call.
- OR -
Retrieve call from Park orbit.
To get the outside call, you can either press a line key or press the Speaker key and dial 9, the Trunk Access Code

+ the trunk number (default #9). You can optionally go back to step 2 to add more parties to your Conference.
4. When called party answers, press the Conf softkey or Conf twice.
If you cannot add additional parties to your Conference, you have exceeded the system's Conference limit.

If the call being added is busy/unanswered:

With an outside call, press the line or Call Appearance (CAP) key for a call previously added to the Conference.
The unanswered call will drop and the initiator will be back into the Conference call.
Adding an Intercom call to an outside Conference call: Press the Conf softkey on the Multiline Terminal display

or Conf twice to re-establish the Conference. If using a non-display telephone, press Conf twice.
With only Intercom calls in the Conference: Press Conf twice to re-establish the Conference. If the voice mail

answers, there is no way to drop that extension out. You need to drop the Conference call.
5. Repeat steps 2~4 to add more parties.
Single Line Telephone
1. Establish Intercom or trunk call.
2. Hookflash and dial
3. Dial extension you want to add.
- OR -
Access trunk call.
- OR -
Retrieve call from Park orbit.
4. Hookflash and repeat step 3 to add more parties.
- OR -
Hookflash twice to set up the Conference.
To Split (alternate) between the parties in Conference:
Multiline Terminal
1. Press Conf (Transfer) or Conference key (PRG 15-07 or SC 751: 07).
Conference
1.
#
Document Revision 4C
2 - 255