NEC Electra Elite IPK II System User Manual page 479

Electra Elite IPK II
Table 2-21 Service Code Setup (for Setup/Entry Operation), Program 11-11 (Continued)
Item
No.
58 Call Forward with Personal Greeting
Table 2-22 Service Code Setup (for Service Access), Program 11-12
Item
No.
01 Bypass Call
Activating Call Forwarding/Do Not Disturb Override. This code
is available only if you disable the voice mail Single Digit
dialing code in Program 11-16-09.
02 Conference
03 Override (Off-Hook Signaling)
04
Set Camp-On
05 Cancel Camp-On
06 Switching of Voice Call and Signal Call
07
Step Call
08 Barge-In
09
Change to STG (Department Group) All Ring
10
Station Speed Dialing
11 Group Speed Dialing
12
Last Number Dial
13 Saved Number Dial
14 Trunk Group Access
15
Specified Trunk Access
16 Trunk Access Via Networking
17 Clear Last Number Dialing Data
18
Clear Saved Number Dialing Data
19 Internal Group Paging
20
External Paging
21
Meet-Me Answer to Specified Internal Paging Group
22 Meet-Me Answer to External Paging
Flexible System Numbering
Item
Item
Document Revision 4C
Terminals Default
MLT, SLT 713
Terminals Default
MLT, SLT 707
# 1
MLT, SLT
MLT, SLT 709
MLT, SLT 750
MLT, SLT 770
MLT, SLT 712
MLT, SLT 708
MLT, SLT 710
MLT, SLT No Setting
# 2
MLT, SLT
# 4
MLT, SLT
MLT, SLT # 5
MLT, SLT 715
MLT, SLT 704
MLT, SLT # 9
MLT No Setting
MLT, SLT 776
MLT, SLT 785
MLT, SLT 701
MLT, SLT 703
MLT, SLT 764
MLT, SLT 765
Related
Program
Related
Program
11-16-09
16-02
31-01-01
2 - 455