NEC Electra Elite IPK II System User Manual page 611

Electra Elite IPK II

84-13-07 SIP Trunk CODEC Information Basic Setup – G.729 Audio Frame Number
Set the G.729 Audio Frame Number. Entries: 2~6
(Default: 2)
2 = 20 ms
3 = 30 ms
4 = 40 ms
5 = 50 ms
6 = 60 ms

84-13-08 SIP Trunk CODEC Information Basic Setup – G.729 Voice Activity Detection Mode
Enable (1)/Disable (0) the G.729 VAD Detection Mode.
(Default: 0)

84-13-09 SIP Trunk CODEC Information Basic Setup – G.729 Jitter Buffer (min)
Set the minimum (0~200 ms) G.729 Jitter Buffer.
(Default: 20)

84-13-10 SIP Trunk CODEC Information Basic Setup – G.729 Jitter Buffer (Average)
Set the average (0~200 ms) G.729 Jitter Buffer.
(Default: 40)

84-13-11 SIP Trunk CODEC Information Basic Setup – G.729 Jitter Buffer (max)
Set the maximum (0~200 ms) G.729 Jitter Buffer.
(Default: 60)

84-13-17 SIP Trunk CODEC Information Basic Setup – Jitter Buffer Mode
Set the Jitter Buffer Mode.
Entries: 1= Static, 2 = Adaptive during silence, 3 = Adaptive Immediately
(Default: 3)

84-13-18 SIP Trunk CODEC Information Basic Setup – VAD Threshold
Set the VAD (Voice Activity Detection) threshold.
Entries: 0~30 (-19dB~+10dB)
(Default: 20)
1 = -19dB (-49dBm)
20 = 0dB (-30dBm)
29 = 9dBm (-21dBm)
30 = 10dBm (-20dBm)

84-13-26 SIP Trunk CODEC Information Basic Setup – TX Gain
Set the transmit gain.
Entries: 0~28 (-14dBm ~ +14dBm)
(Default: 10)
0 = -14 dBm
1 = -13 dBm
14 = 0 dBm
27 = 13 dBm
28 = 14 dBm
IP Trunk (SIP) – MG16
Document Revision 4C
2 - 587