NEC Electra Elite IPK II System User Manual page 59

Electra Elite IPK II
System Information
slot location
15 2-7
16 2-8
17 3-1
18 3-2
19 3-3
20 3-4
21 3-5
22 3-6
23 3-7
24 3-8
Conditions
Alarm Reports and System Information Reports can be output to KSU COM Port 1 or a

CTU/ CTA adapter.
The IPK II supports the following Alarms to be output to the LCD of a multiline terminal:

SMDR Buffer Full
CPU-LAN link Error
The IPK II does not support printouts of the following Alarms:

Power Failure
RAM Backup Battery Error
Networking Keep Alive Error
Program 15-02-19 must be set to Non-Procedural Mode when using CTA/CTU adapters for

printouts.
Up to 12 System Alarm times can be scheduled to print on a Monthly, Daily, and Hourly

time frame. The report indicates both Major and Minor Alarms.
System Information Reports cannot be set to output at a scheduled time.

Alarm Reports
Table 2-4 Sample System Information Printout (Continued)
type assign port
none Not Install
none Not Install
none Not Install
none Not Install
none Not Install
none Not Install
none Not Install
none Not Install
none Not Install
none Not Install
05/18/2006 11:02
condition
Document Revision 4C
note
2 - 35