NEC Electra Elite IPK II System User Manual page 674

Document Revision 4C
In 20-09-03, set the
extension's COS to '0'.
In 20-13-23, set the
extension's COS to '0'.
In 22-02-01, enter
0.
In 22-04-01, do not
assign extension
to PRI
trunk's Ring
Group.
2 - 650
A
Should the sub-address
No ID be displayed for
incoming calls?
Should an extension
No be able to display the reason why
a call is transferred to it?
Define the extension's
Class of Service in 20-06-01.
Is SMDR used?
No
Should all PRI
Yes Trunks ring the same
extensions?
In 22-05-01, assign all the trunks on a
PRI ETU to the same Ring Group.
In 14-07-01 and 15-06-01, set up the trunk
Access Maps for PRI trunks.
Should extension
No ring for incoming
calls on PRI trunk?
In 14-01-01,
assign names to
trunks to make
identification
easier.
Go to
B
In 20-09-03, set the
Yes
extension's COS to '1'.
In 20-13-23, set the
Yes
extension's COS to '1'.
In 35-02-15, enter '0' to
print Caller ID Number, "1" DID
Yes
Calling Number or '2' Caller ID
Name.
In 35-02-16, enter '0' to
print the trunk port name
assigned in 14-01-01 or
enter '1' to print the
received dialed number.
In 22-02-01, enter 3.
Refer to the Elite IPK II
No
Manual for DID
programming.
In 22-04-01,
assign extension
Yes
to PRI trunk's Ring
Group.
For each extension in the Ring
Group, in 22-06-01, enter '1' for
each time mode when the
extension should ring.
Electra Elite IPK II
ISDN Compatibility