NEC Electra Elite IPK II System User Manual page 945

Electra Elite IPK II
SMDR requires a connection to the CPUII via a COM port, CTA/CTU or LAN connection.

The system can also use a connection to the system via a CTA/CTU adapter (the CTU
adapter also requires a USB driver). Once you designate a CTA or CTU for SMDR, you
cannot use that extension for placing and answering other data calls. SMDR and the
Traffic Reports should not use the same CTA/CTU.
If no answer is received, NO ANSWER is displayed regardless of the system programing

for the Caller ID display option.
The setting in Program 35-02-18 works regardless of the entry in Program 35-02-15 or

35-02-17.
When Program 35-02-18 is set to 1, the first and second lines are sometimes separated.

When the buffer is full, the overflowed data may not be shown.
The special characters used in the Electra Elite IPK II system cannot be output to the

SMDR – they are converted to _.
To use the PBX Call Reporting option, program system for behind PBX operation.

Traffic Management Reports and SMDR should not use the same CTA/CTU port.

SMDR can be output to eight simultaneous devices. One SMDR Port can be set to the KSU

COM port and one SMDR Port can be set for to the LAN port. The remaining six outputs
can be set to different CTA/CTU adapters.
Default Setting
Disabled
System Availability
Terminals
All Stations
Required Component(s)
Software License
Station Message Detail Recording
Document Revision 4C
2 - 921