K-Ccis - Ip With Iad - NEC Electra Elite IPK II System User Manual

Enhancements
This feature was added with Version 1100.
Version 1600 or higher:
A remote K-CCIS user can transfer a call directly to an ACD Pilot number. Prior to this

release, this type of transfer was not allowed.
Version 2000 or higher:
Supports station numbers to be assigned by the 10s group for 4-digit station numbers, 100s

group for 5-digit, 1,000s group for 6-digit station numbers, and 10,000s group for 7-digit
station numbers.
Description
This feature provides the benefits and additional feature compatibility of Key-Common
Channel Interoffice Signaling (K-CCIS) between multiple systems including NEAX PBX
systems connected together over a Data Communication IP Network (Intranet). Voice signals
and common signaling data from/to the distant offices are converted into IP Packets and
transmitted through the Data IP Network. When using the IP (K-CCIS) to NEAX
(Point-to-Multipoint) feature, both voice and data communication lines are integrated into one
network and communication costs can be reduced.
This feature is available between Electra Elite IPK II systems and NEAX PBX systems. When
connecting to a NEAX system, IPT cards are used and must be installed.
The following K-CCIS features are available with the IP (K-CCIS) to NEAX
(Point-to-Multipoint) feature:
Call Forwarding – All Calls – K-CCIS

Call Forwarding – Busy/No Answer – K-CCIS

Call Transfer – All Calls – K-CCIS

Calling Name Display – K-CCIS

Calling Number Display – K-CCIS

Centralized Billing – K-CCIS

Centralized BLF (K-CCIS)

K-CCIS – IP with IAD
K-CCIS – IP with IAD

K
2 - 655