NEC Electra Elite IPK II System User Manual page 60

Document Revision 4C
When using the E-mail functionality of reports, the E-mail address in Program 90-11-10

(From Address) must be set for the E-mail feature to work.
Output of DIM (debug) and Alarm Reports at the same time is not supported.

Once output of new alarms is performed, these same alarms are not output a second time.

New alarms must be generated before Program 90-12-04 can be performed a second time.
Up to 100 System Alarm Reports can be stored. When the buffer fills, the oldest record is

deleted to allow the new record to be saved.
A CTU adapter USB connection should be safely stopped in Windows before the following

procedures are performed:
CPUII Upgrade
ESIB/E Reset
CPUII Reset
If the System is set up to E-mail the Alarm Reports and the Mail Server is down, the report

is not sent.
System Information Reports cannot be set for E-mail output.

Scheduled Alarm Reports via E-mail prints all alarms. When the system detects New

alarms, this information is output via E-mail individually.
E-mail Alarm Reports can be sent whenever each New alarm occurs per event. If you

want to receive complete Alarm Reports periodically, you must specify 12 individual dates
and times in PRG 90-24-01 ~ PRG 90-24-04 per period.
Default Settings
None
System Availability
Terminals
All Multiline Terminals
2 - 36
Electra Elite IPK II
Alarm Reports