NEC Electra Elite IPK II System User Manual page 293

Electra Elite IPK II

20-12 Class of Service Options (Charging Cost Service)
Refer to
2-214.

20-13 Class of Service Options (Supplementary Service)
Refer to
2-215.

20-14 Class of Service Options for DISA/E&M
Refer to
2-219.
Operation
To make a call using a cordless single line telephone:
1. Go off-hook.
2. Dial the station number or dial the Trunk Access Code and telephone number.
To answer a call using a cordless single line telephone:
When the Multiline Terminal is ringing, the incoming call can be answered by the cordless single line
telephone user by going off-hook, when ringing line preference is assigned for the multiline terminal.
To transfer a call from a cordless single line telephone to its associated multiline terminal:
1. The multiline terminal user goes off-hook.
2. The single line telephone user goes on-hook (at this time, the call is automatically connected to the
multiline terminal).
To transfer a call from a multiline terminal to its associated cordless single line telephone:
1. The single line telephone user goes off-hook (at this time, the call is automatically connected to the
single line telephone).
2. The multiline terminal user goes on-hook.
To use Hookflash:
Refer to the operation for Single Line Telephone Access.
Cordless Telephone Connection
Table 2-11 Class of Service Options (Charging Cost Service), Program 20-12 on page
Table 2-12 Class of Service Options (Supplementary Service), Program 20-13 on page
Table 2-13 Class of Service Options for DISA/E&M Service, Program 20-14 on page
Document Revision 4C
2 - 269