Mazda RX-8 Workshop Manual page 2245

If there is any malfunction, adjust the TR switch. (See
(TR) SWITCH ADJUSTMENT
10. Reinspect for continuity at TR switch.
If there is any malfunction, replace the TR switch. (See
(TR) SWITCH REMOVAL/INSTALLATION
11. Connect the TR switch connector.
12. Install the insulator.
Tightening torque
8—11 N·m {82—112 kgf·cm, 72—97 in·lbf}
13. Install the catalytic converter. (See
MSP].)
14. Install the rear tunnel member.
15. Install the front tunnel member.
16. Connect the negative battery cable.
[SJ6A-EL].)
[SJ6A-EL].)
EXHAUST SYSTEM REMOVAL/INSTALLATION [13B-
TRANSMISSION RANGE
TRANSMISSION RANGE