Connecting And Enabling A Modem (G350 With S8300); Access The Maintenance Web Pages - Avaya G350 Installing And Upgrading

Connecting and enabling a modem (G350 with S8300)

To connect and enable a modem:
1. Access the Maintenance web
2. Change the modem settings on the Configure Server Maintenance web
3. Connect and enable the USB
4. Test the modem
5. If you require a USB CD-ROM drive to download software upgrades, connect the USB
CD-ROM drive to the remaining available USB port on the S8300 module.
The G350 is now prepared for remote configuration using Avaya Installation Wizard (AIW) via
the USB modem.

Access the Maintenance web pages

Most of the preparations you are making require you to access the Maintenance web pages part
of Avaya Integrated Management (AIM) from your laptop. Use this procedure to access the
Maintenance web pages and leave the Maintenance web pages open until you have completed
all the preparations.
To access the Maintenance web pages:
1. Connect the laptop you prepared to the Services port on the S8300. Use a standard
Ethernet crossover cable.
2. Configure the network settings on the laptop, according to the following tables:
pages.
modem.
connection.
Table 2: TCP/IP settings
Setting Value
IP Address 192.11.13.5
Subnet Mask 255.255.255.252
DNS disable
WINS Servers do not use (clear out any values)
Table 3: Internet Browser Settings
Setting
Proxy Server
Connecting and enabling a modem (G350 with S8300)
Value
disable
pages.
Issue 3.1 June 2006 73