Maintenance Web Pages; Changing The Modem Settings On The Configure Server Maintenance Web Page; Connecting And Enabling A Usb Modem (G450 With S8300) - Avaya G450 Install Book

Maintenance web pages

Most of the preparations you are making require you to access the Maintenance web pages part
of Avaya Integrated Management (AIM) from your laptop. After accessing the Maintenance web
pages, leave the Maintenance web pages open until you have completed all the preparations.
Changing the modem settings on the Configure Server Maintenance
Web Page
1. Select Configure Server from the left-hand menu on the Maintenance web page. The
Back Up Data page appears.
2. Follow the on-screen instructions to back up the current data.
3. Click Continue.
4. Select Configure individual services.
5. Click Continue.
6. From the left navigation menu, click Set Modem Interface. The Set Modem Interface page
appears.
7. Enter the RAS IP address you obtained using the ART tool. See
Registration Tool (ART) for the RAS IP address
8. Click Change modem settings.
9. Click Continue.
10. Click Close Window.
Note:
You can only change the modem settings on the Configure Server Maintenance
Note:
Web Pages if you have an Avaya Maintenance contract.

Connecting and enabling a USB modem (G450 with S8300)

If your installation includes an S8300 Server module, you must connect the USB modem to the
S8300. After the G450 is configured, you can leave the modem permanently connected to
enable the S8300 to report alarms to remote locations.
Note:
If you require a USB CD-ROM drive to download software upgrades, connect the
Note:
USB CD-ROM drive to the remaining available USB port on the S8300 Server.
Connecting and enabling a USB modem (G450 with S8300)
on page 20.
Running the Automatic
Issue 5 November 2009 63