Unconditional Debug Event (Ude); Debug Event Summary; Table 8-3. Debug Event Summary - IBM PPC440X5 CPU Core User Manual

Preliminary

8.3.9 Unconditional Debug Event (UDE)

UDE debug events occur when a debug tool asserts the unconditional debug event request via the JTAG
interface. The UDE debug event is the only event which does not have a corresponding enable field in
DBCR0.
When operating in external debug mode or debug wait mode, the occurrence of a UDE debug event is
recorded in DBSR[UDE] and causes the processor to enter the stop state and cease processing instructions.
The program counter will contain the address of the instruction which would have executed next, had the
UDE debug event not occurred. Similarly, when operating in internal debug mode with Debug interrupts
enabled (MSR[DE] = 1), the occurrence of a UDE debug event is recorded in DBSR[UDE] and a Debug inter-
rupt will occur with CSRR0 set to the address of the instruction which would have executed next, had the
UDE debug event not occurred.
When operating in internal debug mode (and not also in external debug mode nor debug wait mode) with
Debug interrupts disabled (MSR[DE] = 0), the occurrence of a UDE debug event will set DBSR[UDE], along
with the Imprecise Debug Event (IDE) field of the DBSR. The Debug interrupt will not occur immediately.
Instead, instruction execution continues, and a Debug interrupt will occur if and when MSR[DE] is set to 1,
thereby enabling Debug interrupts, assuming software has not cleared the UDE debug event status from the
DBSR in the meantime. Upon such a "delayed" interrupt, the Debug interrupt handler software may query the
DBSR[IDE] field to determine that the Debug interrupt has occurred imprecisely.
When operating in trace mode, the occurrence of a UDE debug event simply sets DBSR[UDE] and is indi-
cated over the trace interface, and instruction execution continues.

8.3.10 Debug Event Summary

Table 8-3 summarizes each of the debug event types, and the effect of debug mode and MSR[DE] on their
occurrence.

Table 8-3. Debug Event Summary

External Debug
Debug Wait
Mode Mode
Enabled —
— Enabled
Disabled Disabled
debug.fm.
September 12, 2002
Internal
MSR
Debug
DE
IAC
Mode
— — Yes
— — Yes
Enabled 1 Yes
Debug Events
DAC DVC BRT TRAP
Yes Yes Yes Yes
Yes Yes Yes Yes
Yes Yes Yes Yes
User's Manual
PPC440x5 CPU Core
RET ICMP IRPT
Yes Yes Yes
Yes Yes Yes
Yes Yes Note 1
Page 237 of 589
UDE
Yes
Yes
Yes