Adding Ports To A Port Group; Adding Ports From A Single Device To A Port Group - Extreme Networks Ridgeline Guide Manual

Figure 22: Copy to Device Group Window
4 Select the group in which you want to place the device. Note that a device can be placed in a top-
level group hierarchy only once. See
information.
5 Click OK to place the device in the selected group.

Adding Ports to a Port Group

The ports that make up a port group can be either from a single device or from multiple devices.

Adding Ports from a Single Device to a Port Group

If the port group will contain ports from a single device, do the following:
1 Display the device in a table of devices.
One way to do this is to select the All view, then click the All devices button to show all devices.
2 Right-click the device and select Open from the pop-up menu to display the device details window
for the selected device, as shown in
Ridgeline Concepts and Solutions Guide
"Group Membership Guidelines" on page 53
Figure 23.
3
for more
55