Configure Sflow Sample-Rate - Extreme Networks ExtremeWare Command Reference Manual

Commands for Status Monitoring and Statistics

configure sflow sample-rate

configure sflow sample-rate <number>
Description
Configures the sample rate at which the sFlow agent collects network traffic samples.
NOTE
This command is available only on the "i" series switches.
Syntax Description
number Specifies the fraction (1/number) of packets to be sampled.
Default
8192
Usage Guidelines
This command configures the sample rate at which the sFlow agent collects network traffic samples.
One sample per of packets received will be sent to the sFlow collector. If the sample rate is set
<number>
to '0' (zero), no samples will be sent to the collector.
Example
The following command sets the sample rate to one packet out of every 10000:
configure sflow sample-rate 10000
History
This command was first available in ExtremeWare 7.3.0.
Platform Availability
This command is available only on the "i" series platforms.
704 ExtremeWare 7.5 Command Reference Guide