Unconfigure Configuration-Mode - Extreme Networks ExtremeWare Command Reference Manual

Hide thumbs Also See for ExtremeWare:

Table of Contents

Configuration and Image Commands

unconfigure configuration-mode

Removes the effect of the default startup configuration currently defined for the switch, resetting the

configuration mode to the standard configuration mode.

Syntax Description

This command has no arguments or variables.

The standard mode is the default configuration mode.

Usage Guidelines

Use this command to remove an enhanced mode configuration and reset the configuration to the

default standard configuration mode.

To configure the default startup configuration for the switch, use the

configure configuration-mode

The following command removes the effect of the default startup configuration currently defined for the

switch, resetting the configuration mode to the standard configuration mode.:

unconfigure configuration-mode

This command was first available in ExtremeWare 7.3.0

Platform Availability

This command is available on all platforms.

ExtremeWare Software 7.3.0 Command Reference Guide

Extremeware 7.3.0