Configure Log Filter Events - Extreme Networks ExtremeWare Command Reference Manual

configure log filter events

configure log filter <filter name> [add | delete] {exclude} events [<event
condition> | [all | <event component>] {severity <severity> {only}}]
Description
Configures a log filter by adding or deleting a specified set of events.
Syntax Description
filter name
add
delete
exclude
event condition
all
event component
severity
only
Default
If the
exclude
specified, then the filter uses the default severity threshold for the component (see the note on page 676
when
delete
Usage Guidelines
This command controls the incidents that pass a filter by adding or deleting a specified set of events. If
you want to configure a filter to include or exclude incidents based on event parameter values (for
example, MAC address or BGP Neighbor) see the command
on page 678.
When the
add
severity value, is added to the beginning of the filter item list maintained for this filter. The new filter
item either includes the events specified or, if the
specified.
The keyword is used to remove events from the filter item list that were previously added using
delete
the command. All filter items currently in the filter item list that are identical to, or a subset of, the
add
set of events specified in the
Event Filtering Process. From a logical standpoint, the filter associated with each enabled log target
is examined to determine whether a message should be logged to that particular target. The
determination is made for a given filter by comparing the incident with the most recently configured
filter item first. If the incident matches this filter item, the incident is either included or excluded,
ExtremeWare 7.5 Command Reference Guide
Specifies the filter to configure.
Add the specified events to the filter
Remove the specified events from the filter
Events matching the specified events will be excluded
Specifies an individual event.
Specifies all components and subcomponents.
Specifies all the events associated with a particular component.
Specifies the minimum severity level of events (if the keyword only is omitted).
Specifies only events of the specified severity level.
keyword is not used, the events will be included by the filter. If
or is specified).
exclude
keyword is used, the specified event name, or set of events described by component and
command will be removed.
delete
configure log filter events match
keyword is present, excludes the events
exclude
configure log filter events
is not
severity
675