Unconfigure Elrp-Client - Extreme Networks ExtremeWare XOS Command Reference Manual

unconfigure elrp-client

unconfigure elrp-client <vlan_name>
Description
Disables a pending one-shot or periodic ELRP request for the specified VLAN.
Syntax Description
vlan_name
Default
None.
Usage Guidelines
This command disables a pending one-shot or periodic ELRP request for the specified VLAN.
To start one-time, non-periodic ELRP packet transmission on specified ports of a VLAN using a
particular count and interval, use one of the following commands:
●
configure elrp-client one-shot <vlan_name> ports [<ports> | all] interval <sec>
retry <count> [log | print | print-and-log]
Extreme Networks switches running the ExtremeWare software.)
●
run elrp <vlan_name> {ports <ports>} {interval <sec>} {retry <count>}
To configure periodic transmission of ELRP packets, use the
command.
The ELRP client must be enabled globally in order for it to work on any VLANs. Use the
command to globally enable the ELRP client.
enable elrp-client
The ELRP client can be disabled globally so that none of the ELRP VLAN configurations take effect. Use
the
disable elrp-client
Example
The following command disables a pending ELRP request on VLAN elrp1:
unconfigure elrp-client elrp1
History
This command was first available in ExtremeWare XOS 11.1.
ExtremeWare XOS 11.3 Command Reference
Specifies a VLAN name.
command to globally disable the ELRP client.
—(This command is backward compatible with
configure elrp-client periodic
unconfigure elrp-client
1687