Show Cna-Testplug - Extreme Networks ExtremeWare XOS Command Reference Manual

CNA Agent Commands

show cna-testplug

show cna-testplug
Description
Displays the statistics and connection status with the CNA software from Avaya. The display includes
configured CNA Agent (test plug) and CNA Server (scheduler) connections and the number of tests
conducted on each connection
Syntax
This command has no arguments or variables.
Default
N/A.
Usage Guidelines
This command displays the following information:
Hardware Name—The name of the Extreme Networks device running the CNA Agent (test plug)
●
Firmware version—The version of ExtremeWare XOS firmware running on the device
●
Interface VLAN—VLAN (and virtual router) interface the CNA Server uses to schedule and run the
●
tests
IP address on the interface—IP address of the interface the CNA Server uses; the connection on
●
which the CNA Agent tests and sends results
CNA Test plug version—Version of CNA Agent (test plug) software, in the following format:
●
MajorRev.MinorRev.Build
Interface version with Scheduler—Shows compatibility between the CNA Agent (test plug) and the
●
CNA Server (scheduler) software
Enabled or Disabled
●
Status—Connection status to the CNA Server:
●
Registered
■
Unregistered
■
Errors—Number of errors in tests of connectivity
●
Total tests received—Total test requests received by the CNA Agent
●
Scheduler (SBC)—IP address and port number on which the CNA Server communicates with the
●
CNA Agent; the connection on which the CNA Agent listens
Listening ports
●
Test requests(from ANS)—Number of tests that the CNA Agent was requested to run by the
■
Adaptive Networking Software (ANS) on the CNA Server
RTP test requests(from test plugs)—Number of RTP streams that the CNA Agent initiates
■
1696
ExtremeWare XOS 11.3 Command Reference