Enable Cna-Testplug - Extreme Networks ExtremeWare XOS Command Reference Manual

Version 11.3

Hide thumbs Also See for ExtremeWare XOS:

Table of Contents

enable cna-testplug

Enables the CNA Agent (test plug). Once enabled, the CNA Agent coordinates with the CNA Server to

test the network for throughput.

This command has no arguments or variables.

Usage Guidelines

If you previously configured the IP address for the CNA Server and the VLAN interface, the CNA

Agent immediately registers with the CNA Server upon being enabled and begins running the

requested tests.

The following command enables the CNA Agent:

enable cna-testplug

This command was first available in ExtremeWare XOS 11.2.

Platform Availability

This command is available on all platforms.

ExtremeWare XOS 11.3 Command Reference

Extremeware xos 11.3