Extreme Networks ExtremeWare XOS Command Reference Manual page 1657

configure elrp-client one-shot
Use the command to configure periodic transmission of ELRP
configure elrp-client periodic
packets.
The ELRP client must be enabled globally in order for it to work on any VLANs. Use the
command to globally enable the ELRP client.
enable elrp-client
The ELRP client can be disabled globally so that none of the ELRP VLAN configurations take effect. Use
the command to globally disable the ELRP client.
disable elrp-client
Example
The following example starts one-time, non-periodic ELRP packet transmission on all ports of the
VLAN sales, uses the default interval and transmission times, and sends messages to the console:
configure elrp-client one-shot sales ports all interval 1 retry 3 print
History
This command was first available in ExtremeWare XOS 11.1.
Platform Availability
This command is available on all platforms.
1657
ExtremeWare XOS 11.3 Command Reference