Save Debug Tracefiles - Extreme Networks ExtremeWare XOS Command Reference Manual

save debug tracefiles

save debug tracefiles [internal-memory | memorycard]
Description
Copies debug information to the specified memory card.
Syntax Description
internal-memory
memorycard
Default
N/A.
Usage Guidelines
NOTE
Use this command only under the guidance of Extreme Networks Technical Support personnel to troubleshoot the
switch.
Use this command to copy debug information to the specified memory card. The debug information
includes log files and trace files.
Progress messages are displayed that indicate the file being copied and when the copying is finished.
BlackDiamond 10K Switch Only. In ExtremeWare XOS 11.0, use the
command to copy debug information to the external memory card.
Example
The following command copies debug information to the external memory card installed in a modular
switch:
save debug tracefiles memorycard
The following command copies debug information to the internal memory card installed in the Summit
X450 switch:
save debug tracefiles internal-memory
ExtremeWare XOS 11.3 Command Reference
Specifies that the switch saves debug information to the internal memory card.
NOTE: This parameter is available only on the Summit X450 switch.
Specifies that the switch saves debug information to the external memory card.
NOTE: This parameter is available only on modular switches.
save debug tracefiles
upload debug-info memorycard
1673