Configure Cna-Testplug Vlan - Extreme Networks ExtremeWare XOS Command Reference Manual

configure cna-testplug vlan

configure cna-testplug vlan <vlan_name>
Description
Configures the CNA Agent (test plug) to an interface. By default, the CNA Agent is bound to the
Default VLAN.
Syntax
valn_name
Default
Default VLAN.
Usage Guidelines
The interface IP address is specified when setting up the SSL connection with the CNA Server (when
you issue the
configure cna-testplug scheduler ipaddress
to establish the socket connection on the interface specified in the
interface to conduct the actual tests.
The system uses the primary IP address if the VLAN has more than one IP address. By default, the
CNA Server uses the Default VLAN.
NOTE
Extreme Networks recommends that you put IP telephones on the same virtual router.
Example
The following command instructs the CNA Server to use the interface associated with VLAN gateway
to conduct tests:
configure cna-testplug vlan gateway
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
ExtremeWare XOS 11.3 Command Reference
Specifies which interface IP address the CNA Server uses to communicate with
the CNA Agent.
configure cna-testplug vlan
command. The CNA Server attempts
configure cna-testplug vlan
1693