Appendix D: Added, Modified, And Deleted Commands - Extreme Networks ExtremeWare XOS Command Reference Manual

D Added, Modified, and Deleted Commands
The following is a list of the commands that were added, modified or deleted from one release of
ExtremeWare XOS to the next. This list covers only commands that were newly added or deleted, or
commands that had keywords added or modified for the release. Changes to command defaults or
behavior is not captured here.
ExtremeWare XOS Release 11.3
The changes captured here are changes from the first release of ExtremeWare XOS 11.2 (release number
11.2.2.4), to the first release of ExtremeWare XOS 11.3.
New Commands for Release 11.3
The following are the commands that were added for ExtremeWare XOS release 11.3:
clear counters ports
clear lacp counters
configure access-list add
configure access-list delete
configure netlogin local-user
configure netlogin ports mode
configure ospf restart
configure ospf restart grace-period
configure ospf restart-helper
configure power supply
configure sharing lacp system-priority
configure sys-recovery-level slot
create access-list
delete access-list
disable ospf restart-helper-lsa-check
enable dos-protect simulated
enable ospf restart-helper-lsa-check
restart process
show access-list dynamic
show access-list dynamic counter
show access-list dynamic rule
show lacp
show lacp lag
show lacp member-port
show ports utilization
1699
ExtremeWare XOS 11.3 Command Reference